This plane is a well designed for .91-15cc size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. Bigger wing and bigger wing area helps give a more stable flight. 3 degree wing dihedral gives a good balance flight stability and agility. All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to seperately purchase the nitro engine and radio system, and can fly this plane after 1-2 hours of installation.

Technical data

  • Wingspan: 1883mm (74.1 in) 
  • Length: 1444mm (56.8 in)
  • Flying weight: 3500-4200 gr
  • Wing area: 64.7 dm2
  • Wing loading: 62g/dm2
  • Wing type: Naca airfoils
  • Covering type: V-kote film
  • Spinner size: Plastic 58mm (included)
  • Radio: 6 channel minimum (not included) 
  • Servo: 7 standard servo: 2 aileron; 2 flap; 1 elevator; 1 rudder; 1 throttle (not included) 
  • Recommended receiver battery: 4.8-6V / 800-1200mAh NiMH (not included) 
  • Servo mount: 21mm x 42 mm
  • Propeller: suit with your engine 
  • Engine: .91/15cc / 2-stroke (not included)
  • Motor: brushless out runner 
  • Gravity CG: 95-100 mm (3.7-3.9 in) Back from  the leading edge of the wing, at the fuselage
  • Control throw Ailerons: Low: 8mm up/down, 10% expo; High: 10mm up/down, 10% expo
  • Control throw Elevators: Low: 8mm up/down, 12% expo; High: 10mm up/down, 12% expo
  • Control throw Rudder: Low: 25mm right/left, 15% expo; High: 40mm right/left, 15% expo
  • Experience level: Beginer
  • Plane type: Trainer 


RECOMMENDED MOTOR AND BATTERY SET UP             

  • Motor: Rimfire.60 (not included)
  • Lipo cell: 6 cells / 4000 – 5500mAh (not included)
  • Esc: 60-100A (not included)

Trainer 60-91/15CC

  • Brand: Phoenix
  • Product Code: Trainer 60-91/15CC
  • Availability: In Stock
  • 35.000 KD